**** Please note! This item can only ship via UPS Ground in the United State. It cannot be shipped air so it is not available for shipment to any international destinations or via expedited methods within the US****
Bottled Patina Solution for Copper
This solution is used for creating a patina on copper, bronze, or brass. It is suitable for use on projects both indoors and out.
This solution will produce a beautiful green patina that can vary in color from a light pea green (if applied lightly) to a brighter green with more bluish tones (if overlapped or applied heavily).
The Tiffany green patina will begin to develop immediately but it will develop over a period of several hours before producing the final result.
To use: First clean the metal thoroughly and allow to dry, Then spray, brush or sponge on the solution. It may be prefereable to start out with light coats and re-apply if a deeper color is desired.
After 2- 6 hours the patina will be fully developed.
When done, preserve the look with a clear sealant if desired.
Coverage will vary based on the heaviness of application and the number of coats used. One 32 ounce bottle may cover 80 square feet or more.Clean Copper Sheet before application of bottled patina
Copper Sheet after application of patina.
This is one coat - sprayed on and dabbed with a sponge brush, after about 2 hours.